Five Subaru Car Keys Lessons From The Pros
How to Programming a Subaru Key Fob at Home
Depending on how old your Subaru is, you might require having the key fob programmed by an automotive locksmith. This is done by connecting a computer machine to your car.
To program your Subaru begin by unlocking the driver's door with the door button control and then close it. You will hear a sound on the instrument panel, and the dome lights will light up.
Step 1: Locate the Transmitter Circuit Board
There are a variety of ways to program your key fob. First, you must know which kind of key fob you have. This can be accomplished by examining the shape of the key fob or by listening for a sound in your car.
Once you've got the information you need, you can begin the process of programming your keyfob home. You will need an flathead and a steel key for this. Open the key fob by twisting. Then, push the metal key in and release the battery from the tiny tabs which hold it in place. Replace the battery with a fresh one, and then put the key fob case back together.
Step 2: Disconnect the key fob case
The battery should be replaced. This is a good idea since it can help revive key fobs which aren't working for a while. In some cases the buttons on the key fob can be damaged. If you notice that the button's metal contacts have been loosened then you can try applying solder back to them in order to make them function again.
Before you begin the process, make sure the doors of your vehicle are closed and the ignition is off. Close the driver's side door and then press the door button 10 times in rapid succession. You should then hear the instrument panel chime and your dome lights should flash. This indicates you're now ready to move on.
Step 3: Put the Key Fob in the ignition
There are numerous articles online that will give you steps on how to program a new or replacement Subaru key fob at home, but the majority of them aren't particularly specific. Reprogramming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.
Sit in the driver's seat of your Subaru with the engine off and the doors shut. Use the door button control and use it to unlock all doors. Close and open the driver's door two times more. G28CarKeys and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system will chirp if the settings are altered.
Step 4: Turn the Ignition On.
Before you begin this process of programming a key fob, it is crucial to know that this process only works in the event that you already have a functioning key already. If you don't then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.
Once the key has been programmed, it will be capable of starting your vehicle within a matter of five seconds. To begin, make sure all doors are shut and the engine is off. Sit in the driver's seat and unlock the doors using the button on the door. Insert the key in the ignition and turn it to its first position. The electrical systems will be activated but the engine will remain off. Repeat this process 10 times.
Step 5: Unlock Driver's Door
Subaru provides a variety of premium vehicles with key fobs that lock and unlock doors, start the engine, and even defrost windows. These devices can stop functioning.
To fix the issue, you should contact a locksmith or a dealer. This will fix the problem and make sure that your car is safe.
To accomplish this, you need to open the driver's door, then close it. Place the key into the ignition, and then turn it to position 1. Then, turn it back to the off position. Repeat this 10 times in one row as fast as you can. After the tenth rep, you should hear a sound.
Step 6: Press the Lock/Unlock button on the driver's Door
The procedure for replacing the battery inside a Subaru remote key fob is easy. First, open the exterior fob casing. Utilize a flathead tool to pry the inside of the case and then remove the old batteries.
After taking out the old battery, replace it with a new one and close the case. Relax in the driver's seat and then unlock all doors by using the door-button control. Put the key in the ignition and turn the key to ensure that the electrical system is turned on, but the engine remains off. Repeat this 10 times until you hear a sound on the instrument panel. This puts the system into programming mode.
Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door
For some owners, the annoyance chirp heard when locking and unlocking the Subaru key fob from outside the vehicle can become distracting. In some cases the chirp may be canceled by closing and opening all doors, and then a double-click of the lock button on the key fob.
Switch the ignition off and close all doors, as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime when this is achieved. The chime signals that the lid for the fuel-filler and door are locked. The setting can also be changed to make the doors and fuel-filler lid are locked automatically, without pressing the request switch.
Step 8 Step 8: Enter the 8-digit Transmitter Number.
Write down the first series of 8-digits and keep it in a safe place. Now, climb into your driver's seat. Close all the doors and turn the key to the first position (towards on). After ten turns, your instrument panel will chime once.
Next, open the case for the key fob and find the circuit board that controls the transmitter. The circuit board will have one or two 8-digit numbers. Note the sequence that starts with the first number, and follow the instructions in this guide to register the code in the system of your vehicle. This may require visiting the dealer for older models.